L2Vpn Enable; L2Vpn Statistics Interval - H3C CR16000-F Command Reference Manual

Examples
# Enable IP multicast routing, and then enable the IGMP host feature on GigabitEthernet 3/1/1.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] interface gigabitethernet 3/1/1
[Sysname-GigabitEthernet3/1/1] igmp host enable
Related commands
display igmp host group
group
multicast routing (IP Multicast Command Reference)

l2vpn enable

Use l2vpn enable to enable L2VPN.
Use undo l2vpn enable to disable L2VPN.
Syntax
l2vpn enable
undo l2vpn enable
Default
L2VPN is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must enable L2VPN before you can configure L2VPN settings.
Examples
# Enable L2VPN.
<Sysname> system-view
[Sysname] l2vpn enable

l2vpn statistics interval

Use l2vpn statistics interval to set the VXLAN statistics collection interval.
Use undo l2vpn statistics interval to restore the default.
Syntax
l2vpn statistics interval interval
undo l2vpn statistics interval
Default
The VXLAN statistics collection interval is 15 minutes.
19