Accounting Ppp - H3C MSR 20-20 Command Reference Manual

1918 C 127: AAA C
HAPTER

accounting ppp

Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting portal radius-scheme rd
accounting ppp { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo accounting ppp
ISP domain view
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by
its name, which is a string of 1 to 32 characters.
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
Use the accounting ppp
users.
Use the
undo accounting ppp
By default, the default accounting scheme is used for PPP users.
Note that the RADIUS or HWTACACS scheme specified for the current ISP domain
must have been configured.
accounting default, hwtacacs scheme, radius scheme.
# Configure the default ISP domain system to use the local accounting scheme
for PPP users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting ppp local
# Configure the default ISP domain system to use RADIUS accounting scheme rd
for PPP users and to use the local accounting scheme as the backup scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting ppp radius-scheme rd local
command to specify the accounting scheme for PPP
command to restore the default.