Hwtacacs Nas-Ip; Display Stop-Accounting-Buffer - H3C MSR 20-20 Command Reference Manual

display stop-accounting-buffer

Syntax
View
Parameter
Description
Related command:
Example

hwtacacs nas-ip

Syntax
View
Parameter
Description
Table 513 Description on the fields of the display hwtacacs command
Field
Response-timeout-interval
Acct-stop-PKT retransmit times
Domain-included
Data traffic-unit
Packet traffic-unit
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
Any view
hwtacacs-scheme hwtacacs-scheme-name: Specifies a HWTACACS scheme by
its name, a string of 1 to 32 characters.
Use the
display stop-accounting-buffer
about the stop-accounting requests buffered in the device by scheme, session ID,
time range, user name, or slot.
reset stop-accounting-buffer, stop-accounting-buffer enable (HWTACACS
scheme view), retry stop-accounting (HWTACACS scheme view).
# Display information about the buffered stop-accounting requests for
HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Total 0 record(s) Matched
hwtacacs nas-ip ip-address
undo hwtacacs nas-ip
System view
ip-address: IP address in dotted decimal notation. It must be an address of the
device and cannot be all 0s address, all 1s address, a class D address, a class E
address or a loopback address.
Use the
hwtacacs nas-ip
the source address of the HWTACACS packets to be sent to the server.
Description
Server response timeout period
Number of stop-accounting packet
transmission retries
Whether a user name includes the
domain name
Unit for data flows
Unit for data packets
command to display information
command to set the IP address for the device to use as
1977