Service-Type - H3C MSR 20-20 Command Reference Manual

Description
Example

service-type

Syntax
View
Parameter
Use the
self-service-url enable
localization function and specify the URL of the self-service server for changing
user password.
Use the
self-service-url disable
command to disable the self-service server localization function.
By default, the function is disabled.
Note that:
A self-service RADIUS server, for example, CAMS, is required for the self-service
■
server localization function. With the self-service function, a user can manage
and control his or her accounting information or card number. A server with
self-service software is a self-service server.
After you configure the self-service-url enable command, a user can locate
■
the self-service server by selecting [Service/Change Password] from the 802.1x
client. The client software automatically launches the default browser, IE or
Netscape, and opens the URL page of the self-service server for changing the
user password. A user can change his or her password through the page.
Only authenticated users can select [Service/Change Password] from the
■
802.1x client. The option is gray and unavailable for unauthenticated users.
# Enable the self-service server localization function and specify the URL of the
self-service server for changing user password to
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName for the default ISP
domain system.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] self-service-url enable http://10.153.89.94/sel
fservice/modPasswd1x.jsp|userName
service-type { lan-access | { dvpn | pad | ssh | telnet | terminal }* [ level level ] }
undo service-type { lan-access | { pad | ssh | telnet | terminal }* }
Local user view
lan-access: Authorizes the user to use the Ethernet to access the network. The
user can be, for example, an 802.1x user.
dvpn: Authorizes the user to use the DVPN service.
pad: Authorizes the user to use the PAD service.
ssh: Authorizes the user to use the SSH service.
telnet: Authorizes the user to use the Telnet service.
command to enable the self-service server
command or the undo self-service-url
1943