Local-User Password-Display-Mode; Password - H3C MSR 20-20 Command Reference Manual

local-user password-display-mode

Syntax
View
Parameter
Description
Related command:
Example

password

Syntax
View
Parameter
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
System view
auto: Displays the password of an accessing user based on the configuration of
the user by using the password command.
cipher-force: Displays the passwords of all accessing users in cipher text.
Use the local-user password-display-mode
display mode for all local users.
Use the
undo local-user password-display-mode
default.
The default mode is auto.
With the cipher-force mode configured,
A local user password is always displayed in cipher text, regardless of the
■
configuration of the password command.
If you use the save command to save the configuration, all existing local user
■
passwords will still be displayed in cipher text after the device restarts, even if
you restore the display mode to auto.
display local-user, password.
# Specify to display the passwords of all accessing users in cipher text.
[Sysname] local-user password-display-mode cipher-force
password { cipher | simple } password
undo password
Local user view
cipher: Specifies to display the password in cipher text.
simple: Specifies to display the password in simple text.
password: Password for the local user.
command to set the password
command to restore the
1941