Display Domain - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

display domain

Syntax
View
interface interface-type interface-number: Specifies all user connections of an
interface.
ip ip-address: Specifies all user connections using the specified IP address.
mac mac-address: Specifies all user connections using the specified MAC address.
The MAC address must be in the format of H-H-H.
ucibindex ucib-index: Specifies all user connections using the specified
connection index. The valid range of the ucib-index argument varies by device.
user-name user-name: Specifies all user connections using the specified
username. The user-name argument is a case-sensitive string of 1 to 80 characters
and must contain the domain name. The system assumes that a username entered
contains the domain name.
vlan vlan-id: Specifies all user connections in a VLAN. The VLAN ID ranges from 1
to 4094.
Use the display connection
all AAA user connections.
n
If no argument is specified, this command displays information about all AAA
■
user connections.
This command does not apply to FTP user connections.
■
cut connection.
# Display information about all AAA user connections.
<Sysname> display connection
Index=1 ,Username=telnet@system
IP=10.0.0.1
Total 1 connection(s) matched.
Table 507 Description on the fields of the display connection command
Field
Index
Username
IP
Total 1 connection(s) matched.
display domain [ isp-name ]
Any view
command to display information about specified or
Description
Index number
Username of the connection, in the format
username@domain
IP address of the user
Total number of user connections
1933