Qos Wred Enable - H3C MSR 20-20 Command Reference Manual

1848 C 121: WRED C
HAPTER

qos wred enable

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
Table 490 Description on the fields of the display qos wred interface command
Field
High limit
Discard probability
# Display the WRED configuration and statistics of the specified interface.
<Sysname> display qos wred interface
Interface: Ethernet1/0
Current WRED configuration:
Applied Wred table name: q1
Table Type: Queue based WRED
QID: green-discard
(Packets)
--------------------------------------------------------------------------
0 100
1 0
2 0
3 0
4 0
5 0
6 0
7 0
Table 491 Description on the fields of the display qos wred interface command
Field
Interface
Applied Wred table name
Table Type
QID
green-discard(Packets)
yellow-discard(Packets)
red-discard(Packets)
total-discard(Packets)
qos wred [ dscp | ip-precedence ] enable
undo qos wred enable
Interface view
dscp: Uses the DSCP value for calculating drop probability.
ip-precedence: Uses the IP precedence value for calculating drop probability. By
default, IP precedence is used for calculating drop probability.
Use the
qos wred enable
Use the
undo qos wred enable
method.
Description
Higher limit for queue
Denominator for calculating drop probability
yellow-discard
(Packets)
200
0
0
0
0
0
0
0
Description
Interface name, consisting of interface type and interface
number
WRED table name
WRED table type
Queue ID
Number of the green-discard packets
Number of the yellow-discard packets
Number of the red-discard packets
Number of the total-discard packets
command to apply WRED at an interface.
command to restore the default dropping
red-discard total-discard
(Packets) (Packets)
300
0
0
0
0
0
0
0
600
0
0
0
0
0
0
0