Reset Radius Statistics; Reset Stop-Accounting-Buffer - H3C MSR 20-20 Command Reference Manual

Example

reset radius statistics

Syntax
View
Parameter
Description
Related command:
Example

reset stop-accounting-buffer

Syntax
View
Parameter
NAS transmits the request for the specified maximum number, it sends another
trap message.
If the specified maximum number of transmission attempts is odd, the half of
■
the number refers to the smallest integer greater than the half of the number.
# Enable the RADIUS trap function for accounting servers.
<Sysname> system-view
[Sysname] radius trap accounting-server-down
reset radius statistics
User view
None
Use the
reset radius statistics
display radius scheme.
# Clear RADIUS statistics.
<Sysname> reset radius statistics
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
User view
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
session-id session-id: Specifies a session by its ID, a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end
time in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user name based on which to reset the
stop-accounting buffer. The username is a case-sensitive string of 1 to 80
characters. The format of the user-name argument (for example, whether the
domain name should be included) must comply with that specified for usernames
to be sent to the RADIUS server in the RADIUS scheme.
command to clear RADIUS statistics.
1963