1972
C
128: RADIUS C
HAPTER
Related command:
Example
timer response-timeout (RADIUS scheme view)
Syntax
View
Parameter
Description
C
ONFIGURATION
OMMANDS
Use the
undo timer realtime-accounting
Note that:
For real-time accounting, a NAS must transmit the accounting information of
■
online users to the RADIUS accounting server periodically. This command is for
setting the interval.
The setting of the real-time accounting interval somewhat depends on the
■
performance of the NAS and the RADIUS server: a shorter interval requires
higher performance. You are therefore recommended to adopt a longer
interval when there are a large number of users (more than 1000, inclusive).
The following table lists the recommended ratios of the interval to the number
of users.
Table 512 Recommended ratios of the accounting interval to the number of users
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
retry realtime-accounting, radius scheme.
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
timer response-timeout seconds
undo timer response-timeout
RADIUS scheme view
seconds: RADIUS server response timeout period in seconds. It ranges from 1 to 10
and defaults to 3.
Use the
timer response-timeout
timeout timer.
Use the
undo timer
Note that:
If a NAS receives no response from the RADIUS server in a period of time after
■
sending a RADIUS request (authentication/authorization or accounting
request), it has to resend the request so that the user has more opportunity to
Real-time accounting interval (minute)
3
6
12
15 or more
command to set the RADIUS server response
command to restore the default.
command to restore the default.