Dar Max-Session-Count; Dar Protocol - H3C MSR 20-20 Command Reference Manual

dar max-session-count

Syntax
View
Parameters
Description
Examples

dar protocol

Syntax
View
Parameters
124
DAR C
ONFIGURATION
dar max-session-count count
undo dar max-session-count
System view
count: The maximum number of connections recognizable by DAR, in the range 0
to 65536. It defaults to 65536.
Use the
dar max-session-count
of connections recognizable by DAR.
Use the undo dar max-session-count command to restore the default value.
When large data volume goes through the device, it often takes too many system
resources to recognize them one by one with DAR, which also impacts working of
other modules. To avoid the case, users can limit the maximum number of
connections that can be recognized by DAR in order to save system resources.
When the connection number exceeds the maximum threshold, DAR will not
recognize it and directly mark it to be unrecognizable.
# Set the maximum number of connections recognizable by DAR to 1000.
<Sysname> system-view
[Sysname] dar max-session-count 1000
dar protocol protocol-name { tcp | udp } port { port-value | range port-min
port-max } *
undo dar protocol protocol-name { tcp | udp } port
System view
protocol-name: Application protocol type. As shown in Table 493, the range can
be all protocols listed in the table, or Bittorrent, RTP, RTCP and ten user-defined
C
OMMANDS
command to configure the maximum number
1861