Description
Related command:
Example
secondary authentication (RADIUS scheme view)
Syntax
View
Parameter
Description
port-number: UDP port number of the secondary accounting server, which ranges
from 1 to 65535 and defaults to 1813.
Use the
secondary accounting
port of the secondary RADIUS accounting server.
Use the
undo secondary accounting
Note that:
The IP addresses of the primary and secondary accounting servers cannot be
■
the same. Otherwise, the configuration fails.
The RADIUS service port configured on the device and that of the RADIUS
■
server must be consistent.
key (RADIUS scheme view), radius scheme, state.
# Set the IP address of the secondary accounting server for RADIUS scheme
radius1 to 10.110.1.1 and the UDP port of the server to 1813.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
secondary authentication ip-address [ port-number ]
undo secondary authentication
RADIUS scheme view
ip-address: IP address of the secondary authentication/authorization server, in
dotted decimal notation. The default is 0.0.0.0.
port-number: UDP port number of the secondary authentication/authorization
server, which ranges from 1 to 65535 and defaults to 1812.
Use the
secondary authentication
UDP port of the secondary RADIUS authentication/authorization server.
Use the
undo secondary authentication
Note that:
The IP addresses of the primary and secondary authentication/authorization
■
servers cannot be the same. Otherwise, the configuration fails.
The RADIUS service port configured on the device and that of the RADIUS
■
server must be consistent.
command to configure the IP address and UDP
command to restore the defaults.
command to configure the IP address and
command to restore the defaults.
1967