1964
C
128: RADIUS C
HAPTER
Description
Related command:
Example
retry
Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION
OMMANDS
Use the
reset stop-accounting-buffer
stop-accounting requests, which get no responses.
stop-accounting-buffer enable (HWTACACS scheme view), retry
stop-accounting (HWTACACS scheme view), user-name-format
(HWTACACS scheme view), display stop-accounting-buffer.
# Clear the buffered stop-accounting requests for user user0001@aabbcc.net.
<Sysname> reset stop-accounting-buffer user-name user0001@aabbcc.net
# Clear the buffered stop-accounting requests in the time range from 0:0:0 to
23:59:59 on August 31, 2006.
<Sysname> reset stop-accounting-buffer time-range 0:0:0-08/31/2002 2
3:59:59-08/31/2006
retry retry-times
undo retry
RADIUS scheme view
retry-times: Maximum number of retransmission attempts, in the range 1 to 20.
Use the
command to set the maximum number of RADIUS retransmission
retry
attempts.
Use the
undo retry
The default value for the retry-times argument is 3.
Note that:
Because RADIUS uses UDP packets to transmit data, the communication is not
■
reliable. If the device does not receive a response to its request from the
RADIUS server within the response time-out time, it will retransmit the RADIUS
request. If the number of retransmission attempts exceeds the limit but the
device still receives no response from the RADIUS server, the device regards that
the authentication fails.
The maximum number of retransmission attempts multiplied by the RADIUS
■
server response timeout period cannot be greater than 75.
radius scheme, timer response-timeout (HWTACACS scheme view).
# Set the maximum number of RADIUS request transmission attempts to 5 for
RADIUS scheme radius1.
command to clear the buffered
command to restore the default.