1940
C
127: AAA C
HAPTER
Example
local-user
Syntax
View
Parameter
Description
Related command:
Example
C
ONFIGURATION
OMMANDS
# Set the level of user user1 to 3.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] level 3
local-user user-name
undo local-user { user-name | all [ service-type { dvpn | ftp | lan-access | pad | ppp |
ssh | telnet | terminal } }
System view
user-name: Name for the local user, a case-sensitive string of 1 to 55 characters
that does not contain the domain name. It cannot contain any backward slash (),
forward slash (/), vertical line (|), colon (:), asterisk (*), question mark (?), less-than
sign (<), greater-than sign (>) and the @ sign and cannot be a, al, or all.
all: Specifies all users.
service-type: Specifies the users of a type.
dvpn refers to users using DVPN tunnel,
■
ftp refers to users using FTP,
■
lan-access refers to users accessing the network through an Ethernet, such as
■
802.1x users,
pad refers to users using x.25 PAD,
■
ppp refers to users using PPP,
■
ssh refers to users using SSH,
■
telnet refers to users using Telnet,
■
terminal refers to users logging in through the console port, AUX port, or
■
Asyn port.
Use the
local-user
Use the
undo local-user
By default, no local user is configured.
display local-user, service-type.
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]
command to add a local user and enter local user view.
command to remove the specified local users.