Data-Flow-Format (Radius Scheme View) - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

data-flow-format (RADIUS scheme view)

Syntax
View
Parameter
Description
Use the
accounting-on enable send
accounting-on packet retransmission attempts.
Use the
undo accounting-on enable send
By default, the maximum number of accounting-on packet retransmission
attempts is 5.
Note that:
This command is applicable to centralized devices only.
■
Execution of this command does not affect the results of other accounting-on
■
related commands such as accounting-on enable. That is, execution of the
undo accounting-on enable interval command will not disable the
accounting-on function.
The maximum number of accounting-on packet retransmission attempts
■
configured with this command takes effect immediately.
radius scheme, accounting-on enable.
# In RADIUS scheme rd, set the maximum number of accounting-on packet
retransmission attempts to 10.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable send 10
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet
{ giga-packet | kilo-packet | mega-packet | one-packet } }*
undo data-flow-format { data | packet }
RADIUS scheme view
data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or
gigabyte.
packet: Specifies the unit for data packets, which can be one-packet, kilo-packet,
mega-packet, or giga-packet.
Use the data-flow-format
packets to be sent to a RADIUS server.
Use the
undo data-flow-format
By default, the unit for data flows is byte and that for data packets is
one-packet.
command to set the maximum number of
command to restore the default.
command to specify the unit for data flows or
command to restore the default.
1951