accounting voip
Syntax
View
Parameter
Description
Related command:
Example
attribute
Syntax
View
Parameter
accounting voip radius-scheme radius-scheme-name
undo accounting voip
ISP domain view
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
Use the
accounting voip
for voice user.
Use the
undo accounting voip
By default, the default accounting scheme is used for VoIP users.
Note that:
The RADIUS scheme specified for the current ISP domain must have been
■
configured.
You must have created a RADIUS scheme before using the accounting voip
■
command.
To implement accounting, you must enable the accounting function and
■
meanwhile have the accounting scheme configured.
domain, radius scheme
# In the default ISP domain system, configure the RADIUS accounting scheme for
VoIP users to rd.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting voip radius-scheme rd
attribute { access-limit max-user-number | idle-cut minute | ip ip-address | location
{ [ nas-ip ip-address port slot-number subslot-number port-number |] port
slot-number subslot-number port-number } | mac mac-address | vlan vlan-id } *
undo attribute { access-limit | idle-cut | ip | location | mac |vlan }*
Local user view
access-limit max-user-number: Specifies the maximum number of concurrent
users that can log in using the current username, which ranges from 1 to 1024.
command to specify the RADIUS accounting scheme
command to restore the default.
1919