H3C MSR 20-20 Command Reference Manual page 1862

1862 C 124: DAR C
HAPTER
C
ONFIGURATION OMMANDS
protocols, including user-defined01, user-defined02, ..., user-defined10. No
port number is specified for the user-defined protocol at the initial state. It will be
effective only after the port number is specified. At the same time, the dar
protocol-rename command can be used to modify the name of user-defined
protocol.
tcp: Based on TCP.
udp: Based on UDP.
port-value: Port number of protocol, in the range 1 to 65535, which cannot be the
same with the configured port number of other protocols in the DAR feature. Up
to 16 port numbers can be set for each protocol, which are separated with spaces.
range port-min port-max: Set the range of port number, port-min for the
minimum port number, and port-max for the minimum port number . The
difference value between the maximum number and minimum number shall be
smaller than 1000, i.e. port-max - port-min < 1000. The port number of other
application protocols in the DAR feature cannot be within the range.
Table 493 Protocols of pre-defined ports
Protocol name
BGP
Citrix
Citrix
CUSeeMe
CUSeeMe
DHCP
DNS
eDonkey
Exchange
Fasttrack
Finger
FTP
Gnutella
Gopher
H323
H323
HTTP
IMAP
IRC
Kerberos
L2TP
LDAP
Mgcp
Mgcp
Napster
Protocol type
TCP/UDP
TCP
UDP
TCP
UDP
UDP
TCP/UDP
TCP
TCP
TCP
TCP
TCP
TCP
TCP/UDP
TCP
UDP
TCP
TCP/UDP
TCP/UDP
TCP/UDP
UDP
TCP/UDP
TCP
UDP
TCP
Pre-defined port number
179
1494
1604
7648, 7649
7648, 7649, 24032
67, 68
53
4662
135
1214
79
21
6346, 6347, 6348, 6349, 6355, 5634
70
1300, 1718, 1719, 1720, 11000-1999
1300, 1718, 1719, 1720, 11720
80
143, 220
194
88, 749
1701
389
2427, 2428, 2727
2427, 2727
6699, 8875, 8888, 7777, 6700, 6666,
6677, 6688, 4444, 5555