Access-Limit; Accounting Default - H3C MSR 20-20 Command Reference Manual

127

access-limit

Syntax
View
Parameter
Description
Example

accounting default

Syntax
View
AAA C
ONFIGURATION
access-limit { disable | enable max-user-number }
undo access-limit
ISP domain view
disable: Specifies that the system does not limit the number of accessing users in
the current ISP domain.
enable max-user-number: Specifies that the system limits the number of accessing
users in the current ISP domain. max-user-number is the maximum number of
accessing users in the current ISP domain. The valid range is from 1 to 1024.
Use the
access-limit enable
accessing users allowed by an ISP domain.
Use the
undo access-limit
limitation.
By default, there is no limit to the amount of supplicants in an ISP domain.
As the supplicants may compete for network resources, setting a proper limit to
the amount of accessing users helps in providing a reliable system performance.
# Set a limit of 500 supplicants for ISP domain aabbcc.net.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] access-limit enable 500
accounting default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none
| radius-scheme radius-scheme-name [ local ] }
undo accounting default
ISP domain view
C
command to set the maximum number of
or access-limit disable command to remove the
OMMANDS