Timer Quiet (Hwtacacs Scheme View); Timer Realtime-Accounting (Hwtacacs Scheme View) - H3C MSR 20-20 Command Reference Manual

Related command:
Example

timer quiet (HWTACACS scheme view)

Syntax
View
Parameter
Description
Related command:
Example

timer realtime-accounting (HWTACACS scheme view)

Syntax
View
Parameter
Description
reset stop-accounting-buffer, hwtacacs scheme, display
stop-accounting-buffer.
# In HWTACACS scheme hwt1, enable the device to buffer the stop-accounting
requests getting no responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
timer quiet minutes
undo timer quiet
HWTACACS scheme view
minutes: Primary server quiet period, in minutes. It ranges from 1 to 255 and
defaults to 5.
Use the command to set the quiet timer for the primary server, that
timer quiet
is, the duration that the status of the primary server stays blocked before resuming
the active state.
Use the
undo timer quiet
display hwtacacs.
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet
timer realtime-accounting minutes
undo timer realtime-accounting
HWTACACS scheme view
minutes: Real-time accounting interval in minutes. It is a multiple of 3 in the range
3 to 60 and defaults to 12.
Use the
timer realtime-accounting
interval.
command to restore the default.
10
command to set the real-time accounting
1987