Qos Pql Protocol Mpls Exp - H3C MSR 20-20 Command Reference Manual

1858 C 123: MPLS Q
HAPTER
Description
Related commands:
Examples

qos pql protocol mpls exp

Syntax
View
Parameters
Description
S C C
O ONFIGURATION OMMANDS
queue: Queue number of CQ, in the range 0 to 16.
exp-value: EXP domain of MPLS packet, in the range 0 to 7. Up to 8 can be
configured, separated with space.
Use the
qos cql protocol mpls exp
rule based on the MPLS protocol.
Use the undo qos cql protocol mpls exp
corresponding classification rule.
For the same cql-index, this command can be used repeatedly to establish multiple
types of classification rules for IP packets.
When multiple rules are present, the device matches packets in the sequence that
rules are configured.
qos cql protocol.
# Configure classification rule based on the MPLS protocol CQL 10, and sets the
queue 1 to correspond with EXP value 1.
<Sysname> system-view
[Sysname] qos cql 10 protocol mpls exp 1 queue 1
qos pql pql-index protocol mpls exp exp-value queue { top | middle | normal |
bottom }
undo qos pql pql-index protocol mpls exp exp-value
System view
pql-index: Group number of priority queuing list (PQL), in the range 1 to 16.
queue: Queue name, which is valued top, middle, normal and bottom.
exp-value: EXP domain value of MPLS packet, in the range 0 to 7. Up to 8 can be
configured, separated with space.
Use the
qos pql protocol mpls exp
rule based on MPLS protocol.
Use the
undo qos pql protocol mpls exp
PQL classification rules.
For the same pql-index, this command can be used repeatedly to establish several
types of PQL classification rules for IP packets.
command to configure CQ classification
command to delete the
command to establish the PQL classification
command to delete corresponding