H3C MSR 20-20 Command Reference Manual page 1846

1846 C 120: P
HAPTER ORT
Description
Examples
P T M C
RIORITY RUST ODE ONFIGURATION
Use the qos trust
Use the
undo qos trust
By default, 802.1p priority carried with a packet is not trusted.
Port group is supported if the number of the interfaces on a layer 2 module is 16,
24 or 48.
Execute the command in interface view, and the setting is valid on the current
interface only. Execute the command in interface group view, and the setting is
valid on all interfaces in the interface group.
# Configure the priority trust mode on the port Ethernet 1/0 to be 802.1p priority
carried with the trust packet.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] qos trust dot1p
C
OMMANDS
command to set to trust 802.1p priority carried with a packet.
command to restore the default.