Remark Mpls-Exp - H3C MSR 20-20 Command Reference Manual

Related commands:
Examples

remark mpls-exp

Syntax
View
Parameters
Description
Related commands:
Examples
When multiple rules are present, the device matches packets in the sequence that
rules are configured.
qos pql protocol.
# Configure classification rule based on the MPLS protocol CQL 10, and sets the
queue top to correspond with EXP value 5.
<Sysname> system-view
[Sysname] qos pql 10 protocol mpls-exp 5 queue top
remark mpls-exp exp-value
undo remark mpls-exp
Traffic behavior view
exp-value: EXP value of MPLS, in the range 0 to 7.
Use the
remark mpls-exp
MPLS packet.
Use the undo remark mpls-exp
traffic classifier, qos policy, classifier behavior.
# Set EXP value of remarked MPLS packet to 0.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark mpls-exp 0
command to configure the EXP value of remarked
command to remove the configuration.
1859