Fragment; Fr-Class - H3C MSR 20-20 Command Reference Manual

1892 C 125: FR Q
HAPTER
Examples

fragment

Syntax
View
Parameters
Description
Related commands:
Examples

fr-class

Syntax
View
Parameters
Description
S C C
O ONFIGURATION OMMANDS
# Enable FRTS on the serial interface Serial 1/0.
<Sysname> system-view
[Sysname] interface Serial1/0
[Sysname-Serial1/0] fr traffic-shaping
fragment [ fragment-size ]
undo fragment [ fragment-size ]
Frame relay class view
fragment-size: Size of a fragment, in byte, ranging from 16 to 1600. By default,
the fragment size is of 45 bytes.
Use the
fragment
function on FR virtual circuit.
Use the
undo fragment
By default, the fragmentation function on FR virtual circuit is disabled.
fr class.
# Configure fragment size as 128 in the FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fragment 128
fr-class class-name
undo fr-class class-name
Frame relay DLCI view/Frame relay interface view
class-name: Name of a FR class, a string of 1 to 30 characters.
Use the
fr-class
or FR interface.
Use the
undo fr-class
and the FR virtual circuit or FR interface.
By default, there is no association between a FR class and the FR virtual circuit or
FR interface.
command to enable the FRF.12-compliant fragmentation
command to disable this function.
command to associate a FR class with the current FR virtual circuit
command to remove the association between a FR class