Dot1X Handshake - H3C MSR 20-20 Command Reference Manual

Example

dot1x handshake

Syntax
View
Parameter
Description
Example
# Specify port Ethernet 1/0 to use VLAN999 as its guest VLAN.
<Sysname> system-view
[Sysname] dot1x guest-vlan 999 interface ethernet 1/0
# Specify ports Ethernet 1/2 to Ethernet 1/5 to use VLAN10 as its guest VLAN.
<Sysname> system-view
[Sysname] dot1x guest-vlan 10 interface ethernet 1/2 to ethernet 1/5
# Specify all ports to use VLAN7 as their guest VLAN.
<Sysname> system-view
[Sysname] dot1x guest-vlan 7
# Specify port Ethernet 1/7 to use VLAN3 as its guest VLAN.
<Sysname> system-view
[Sysname] interface ethernet 1/7
[Sysname-Ethernet1/7] dot1x guest-vlan 3
dot1x handshake
undo dot1x handshake
Interface view
None
Use the
dot1x handshake
function so that the device can periodically send handshake messages to the client
to check whether a user is online.
Use the
undo dot1x handshake
By default, the function is enabled.
Note that:
The 802.1x proxy detection function depends on the online user handshake
function. Be sure to enable handshake before enabling proxy detection and to
disable proxy detection before disabling handshake.
# Enable online user handshake.
<Sysname> system-view
[Sysname] interface ethernet 1/4
[Sysname-Ethernet1/4] dot1x handshake
command to enable the online user handshake
command to disable the function.
1903