Timer Response-Timeout (Hwtacacs Scheme View) - H3C MSR 20-20 Command Reference Manual

1988 C 129: HWTACACS C
HAPTER
Example

timer response-timeout (HWTACACS scheme view)

Syntax
View
Parameter
Description
Related command:
C
ONFIGURATION OMMANDS
Use the undo timer realtime-accounting
Note that:
For real-time accounting, a NAS must transmit the accounting information of
■
online users to the HWTACACS accounting server periodically. This command is
for setting the interval.
The setting of the real-time accounting interval somewhat depends on the
■
performance of the NAS and the HWTACACS server: a shorter interval requires
higher performance. You are therefore recommended to adopt a longer
interval when there are a large number of users (more than 1000, inclusive).
The following table lists the recommended ratios of the interval to the number
of users.
Table 514 Recommended ratios of the accounting interval to the number of users
Number of users
1 to 99
100 to 499
500 to 999
1000 or more
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme
hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
timer response-timeout seconds
undo timer response-timeout
HWTACACS scheme view
seconds: HWTACACS server response timeout period in seconds. It ranges from 1
to 300 and defaults to 5.
Use the
timer response-timeout
response timeout timer.
Use the undo timer command to restore the default.
As HWTACACS is based on TCP, the timeout of the server response timeout timer
and/or the TCP timeout timer will cause the device to be disconnected from the
HWTACACS server.
display hwtacacs.
command to restore the default.
Real-time accounting interval (minute)
3
6
12
15 or more
command to set the HWTACACS server