accounting-on enable
Syntax
View
Parameter
Description
Related command:
Example
128
RADIUS C
C
OMMANDS
accounting-on enable
undo accounting-on enable
RADIUS scheme view
None
Use the
accounting-on enable
function. After doing so, when the device reboots, a message will be sent to the
RADIUS server to force the users of the device offline.
Use the
undo accounting-on enable
function.
By default, the accounting-on function is disabled.
Note that:
This command is applicable to centralized devices only.
■
Execution of this command does not affect the results of other accounting-on
■
related commands such as accounting-on enable send.
If the system has no authentication scheme enabled with the accounting-on
■
function when you execute the accounting-on enable command, you need
to save the configuration and restart the device so that the command takes
effect. Otherwise, the command takes effect immediately.
radius scheme.
# Enable the accounting-on function for RADIUS authentication scheme rd.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable
ONFIGURATION
command to enable the accounting-on
command to disable the accounting-on
1949