1960
C
128: RADIUS C
HAPTER
Related command:
Example
radius client
Syntax
View
Parameter
Description
Example
radius nas-ip
Syntax
C
ONFIGURATION
OMMANDS
key (RADIUS scheme view), radius scheme, state.
# Set the IP address of the primary authentication/authorization server for RADIUS
scheme radius1 to 10.110.1.1 and the UDP port of the server to 1812.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] primary authentication 10.110.1.1 1812
radius client enable
undo radius client
System view
None
Use the
radius client enable
RADIUS client.
Use the
undo radius client
RADIUS client.
By default, the listening port is enabled.
Note that when the listening port of the RADIUS client is disabled:
The RADIUS client can either accept authentication, authorization or
■
accounting requests or process timer messages. However, it fails to transmit
and receive packets to and from the RADIUS server.
The end account packets of online users cannot be sent out and buffered. This
■
may cause that the RADIUS server still has the user record after a user goes
offline for a period of time.
The authentication, authorization and accounting turn to the local scheme
■
after the RADIUS request fails if the RADIUS scheme and the local
authentication, authorization and accounting scheme are configured.
The buffered accounting packets cannot be sent out and will be deleted from
■
the buffer when the configured maximum number of attempts is reached.
# Enable the listening port of the RADIUS client.
<Sysname> system-view
[Sysname] radius client enable
radius nas-ip ip-address
command to enable the listening port of the
command to disable the listening port of the