dot1x multicast-trigger
Syntax
View
Parameter
Description
Related command:
Example
dot1x port-control
Syntax
View
Parameter
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] dot1x max-user 32
dot1x multicast-trigger
undo dot1x multicast-trigger
Interface view
None
Use the
dot1x multicast-trigger
function of 802.1x to send multicast trigger messages to the clients periodically.
Use the
undo dot1x multicast-trigger
By default, the multicast trigger function is enabled.
display dot1x.
# Disable the multicast trigger function for interface wlan-ess 1.
<Sysname> system-view
[Sysname] interface wlan-ess 1
[Sysname] undo dot1x multicast-trigger
In system view:
dot1x port-control { authorized-force | auto | unauthorized-force } [ interface
interface-list ]
undo dot1x port-control [ interface interface-list ]
In Ethernet interface view:
dot1x port-control { authorized-force | auto | unauthorized-force }
undo dot1x port-control
System view/interface view
authorized-force: Places the specified or all ports in the state of authorized,
allowing users of the ports to access the network without authentication.
command to enable the multicast trigger
command to disable this function.
1905