Display Dot1X - H3C MSR 20-20 Command Reference Manual

126

display dot1x

Syntax
View
Parameter
Description
Related commands:
Example
802.1 C
X ONFIGURATION
display dot1x [ sessions | statistics ] [ interface interface-list ]
Any view
sessions: Displays 802.1x session information.
statistics: Displays 802.1x statistics.
interface interface-list: Specifies an Ethernet port list, which can contain multiple
Ethernet ports. The interface-list argument is in the format of interface-list =
{ interface-type interface-number [ to interface-type interface-number ] } &
<1-10>, where interface-type represents the port type, interface-number
represents the port number, and & <1-10> means that you can provide up to 10
port indexes/port index lists for this argument. The start port number must be
smaller than the end number and the two ports must be of the same type.
Use the display dot1x
session information, statistics, or configuration.
With both the sessions keyword and the statistics keyword not provided, this
command displays 802.1x configuration information.
reset dot1x statistics, dot1x, dot1x retry, dot1x max-user, dot1x
port-control, dot1x port-method, dot1x timer.
# Display 802.1x configuration information.
<Sysname> display dot1x
Global Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
The maximal retransmitting times
Total maximum 802.1x user resource number is 1024 per slot
Total current used 802.1x resource number is 0
Ethernet1/1 is link-up
802.1X protocol is disabled
command to display information about 802.1x, including
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
C
OMMANDS
15 s
100 s
3