Reset Dar Session - H3C MSR 20-20 Command Reference Manual

View
Parameters
Description
Examples

reset dar session

Syntax
View
Parameters
Description
Examples
User view
protocol protocol-name: Deletes statistics information about specified protocol,
in the same range with protocol-name in the if-match protocol command.
interface-type interface-number: Specifies an interface by its type and number.
all: Deletes all statistics information.
Use the
reset dar protocol-statistic
information, i.e. to restore the statistics to 0.
# Delete FTP protocol statistics information of the interface Ethernet 1/0.
<Sysname> reset dar protocol-statistic protocol ftp interface Ethernet 1/0
# Deletes all statistics information.
<Sysname> reset dar protocol-statistic all
reset dar session
User view
None
Use the
reset dar session
information.
# Delete all session connection cache information.
<Sysname> reset dar session
command to delete DAR protocol statistics
command to clear all session connection cache
1873