Hello Enable - H3C MSR Series Manual

2
254
255
Table 5 Command output
Field
TerminalID
Type
Interface
ListenPort
State

hello enable

Use hello enable to enable handshaking for a POS application template.
Use undo hello enable to disable handshaking for a POS application template.
Syntax
hello enable
undo hello enable
Default
Handshaking for POS application templates is disabled.
Views
POS application template view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only on TCP-based POS application templates.
TCP -
TCP -
Flow Asy1/0
Description
ID of the POS terminal template.
POS terminal access mode: Flow or TCP.
Access interface.
If no interface is configured, or the POS terminal is in the TCP access mode, this
field displays a hyphen (-).
Listening port for a POS terminal.
If no interface is configured, or the POS terminal is in flow access mode, this
field displays a hyphen (-).
Connection state of the POS terminal.
For the flow access mode:
•
Up—The connection has been established.
•
Down—The connection has been terminated.
For the TCP access mode:
•
Unlinked—The connection has not been established.
•
Linking—The connection is being established.
•
Linked—The connection has been established.
•
Multilink(N)—Multiple TCP connections have been established for the POS
terminal. N indicates the number of TCP connections.
•
Error—The entry is not available.
2000 Error
3000 Multilink(2)
- Up
8