Authentication Portal - H3C MSR 20-20 Command Reference Manual

Related command:
Example

authentication portal

Syntax
View
Parameter
Description
Related command:
Example
Use the
undo authentication login
By default, the default authentication scheme is used for login users.
Note that the RADIUS or HWTACACS scheme specified for the current ISP domain
must have been configured.
authentication default, hwtacacs scheme, radius scheme.
# Configure the default ISP domain system to use the local authentication
scheme for login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login local
# Configure the default ISP domain system to use RADIUS authentication scheme
rd for login users and to use the local authentication scheme as the backup
scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login radius-scheme rd local
authentication portal { none | radius-scheme radius-scheme-name }
undo authentication portal
ISP domain view
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
Use the authentication portal
for portal users.
Use the
undo authentication portal
By default, the default authentication scheme is used for portal users.
Note that the RADIUS scheme specified for the current ISP domain must have
been configured.
authentication default, radius scheme.
# In the default ISP domain system, specify the authentication scheme for portal
users to RADIUS scheme, with the name rd.
command to restore the default.
command to specify the authentication scheme
command to restore the default.
1923