View
Parameter
Description
Related command:
Example
cut connection
Syntax
View
Parameter
ISP domain view
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
Use the
authorization voip
VoIP users.
Use the
undo authorization voip
By default, the default authorization scheme configured is used for VoIP users.
Note that:
The RADIUS scheme specified for the current ISP domain must have been
■
configured.
You must have created a RADIUS scheme before using the authorization voip
■
command.
The scheme specified in this command must be the same with authentication
■
scheme, otherwise authorization will fail.
To implement authorization, you must enable the authorization function and
■
meanwhile have the authorization scheme configured.
domain, radius scheme
# In the default ISP domain system, configure the RADIUS authorization scheme
for voice users to rd.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authorization voip radius-scheme rd
cut connection { access-type { dot1x | mac-authentication | portal } | all | domain
isp-name | interface interface-type interface-number | ip ip-address | mac mac-address
| ucibindex ucib-index | user-name user-name | vlan vlan-id }
System view
access-type: Specifies user connections of an access mode.
dot1x: Specifies 802.1x authentication user connections.
■
mac-authentication: Specifies MAC authentication user connections.
■
portal: Specifies portal authentication user connections.
■
all: Specifies all user connections.
command to specify the authorization scheme for
command to restore the default.
1931