Fr Class; Fr Congestion-Threshold - H3C MSR 20-20 Command Reference Manual

1886 C 125: FR Q
HAPTER
Related commands:
Examples

fr class

Syntax
View
Parameters
Description
Related commands:
Examples

fr congestion-threshold

Syntax
View
S C C
O ONFIGURATION OMMANDS
When the router serves as DCE for switching, the FIFO queue length of DLCI can
be set if FRTS has been applied to DLCI.
fr class.
# Set the FIFO queue of the FR class named test1 to hold 80 packets at most.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fifo queue-length 80
fr class class-name
undo fr class class-name
System view
class-name: FR class name, a string of 1 to 30 characters.
Use the
fr class
Use the undo fr class
By default, no FR class is created.
Only after associating a FR class with an interface or virtual circuit and enabling the
FR QoS function on the corresponding interface, can the set FR class parameter
take effect.
When a FR class is deleted, the association between all interfaces or DLCIs and the
FR class will be released.
fr-class.
# Create a FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1]
fr congestion-threshold { de | ecn } queue-percentage
undo fr congestion-threshold { de | ecn }
Frame relay interface view, MFR interface view
command to create a FR class and enter FR class view.
command to delete a specified FR class.