User-Name-Format (Hwtacacs Scheme View) - H3C MSR 20-20 Command Reference Manual

Example

user-name-format (HWTACACS scheme view)

Syntax
View
Parameter
Description
Related command:
Example
# Set the HWTACACS server response timeout timer to 30 seconds for
HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30
user-name-format { with-domain | without-domain }
HWTACACS scheme view
with-domain: Includes the ISP domain name in the username sent to the
HWTACACS server.
without-domain: Excludes the ISP domain name from the username sent to the
HWTACACS server.
Use the
user-name-format
be sent to a HWTACACS server.
By default, the ISP domain name is included in the username.
Note that:
A username is generally in the format of userid@isp-name, of which isp-name
■
is used by the device to determine the ISP domain to which a user belongs.
Some earlier HWTACACS servers, however, cannot recognize a username
including an ISP domain name. Before sending a username including a domain
name to such a HWTACACS server, the device must remove the domain name.
This command is thus provided for you to decide whether to include a domain
name in a username to be sent to a HWTACACS server.
If a HWTACACS scheme defines that the username is sent without the ISP
■
domain name, do not apply the HWTACACS scheme to more than one ISP
domain, thus avoiding the confused situation where the HWTACACS server
regards two users in different ISP domains but with the same userid as one.
hwtacacs scheme.
# Specify the device not to include the ISP domain name in the username sent to
the HWTACACS servers for the HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] user-name-format without-domain
command to specify the format of the username to
1989