Display Fr Class-Map - H3C MSR 20-20 Command Reference Manual

View
Parameters
Description
Related commands:
Examples

display fr class-map

Syntax
View
Parameters
Description
Examples
Frame relay class view
cql cql-index: Group number of Custom Queuing, ranging from 1 to 16.
Use the command to set the FR virtual circuit queuing to Custom Queuing
cq
(CQ).
Use the undo cq command to restore the FR virtual circuit queuing to FIFO.
By default, the virtual circuit queuing type is FIFO.
If you use this command repeatedly on the same FR, the new configuration will
overwrite the old one.
wfq, pq, fr pvc-pq.
# Apply the group10 of Custom Queuing to the FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cq cql 10
display fr class-map { fr-class class-name | interface interface-type
interface-number }
Any view
class-name: FR class name, a string of 1 to 30 characters.
interface-type interface-number: Specifies an interface by its type and number.
Use the
display fr class-map
interface map, including DLCIs of interfaces, subinterfaces on the interfaces and
their DLCIs.
When configuring the command, you can specify a FR class name or main
interface, but not a subinterface.
# Display information on the map of FR class to the interface Serial1/0.
<Sysname> display fr class-map interface Serial 1/0
Serial1/0
fr-class ts
Serial1/0.1
fr-class ts
fr dlci 100
fr-class ts
fr dlci 200
fr-class ts
command to view information on FR class to
Serial1/0
Serial1/0.1
1879