Security-Policy-Server; Server-Type - H3C MSR 20-20 Command Reference Manual

1968 C 128: RADIUS C
HAPTER
Related command:
Example

security-policy-server

Syntax
View
Parameter
Description
Related command:
Example

server-type

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
key (RADIUS scheme view), radius scheme, state.
# Set the IP address of the secondary authentication/authorization server for
RADIUS scheme radius1 to 10.110.1.2 and the UDP port of the server to 1812.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary authentication 10.110.1.2 1812
security-policy-server ip-address
undo security-policy-server { ip-address | all }
RADIUS scheme view
ip-address: IP address of a security policy server.
all: All IP addresses
Use the
security-policy-server
security policy server.
Use the
undo security-policy-server
IP addresses.
By default, no IP address is configured for a security policy server.
radius nas-ip
# For RADIUS scheme radius1, set the IP address of a security policy server to
10.110.1.2
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] security-policy-server 10.110.1.2
server-type { extended | standard }
undo server-type
RADIUS scheme view
extended: Specifies the extended RADIUS server (generally CAMS), which
requires the RADIUS client and RADIUS server to interact according to the
procedures and packet formats provisioned by the private RADIUS protocol.
command to configure the IP address of a
command to remove one or all configured