Dot1X - H3C MSR 20-20 Command Reference Manual

dot1x

Syntax
View
Parameter
Table 506 Descriptions on the fields of the display dot1x command
Field
Handshake is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
Guest VLAN
Max on-line user number
EAPOL Packet
Sent EAP Request/Identity Packets
EAP Request/Challenge Packets
EAP Success Packets
Received EAPOL Start Packets
EAPOL LogOff Packets
EAP Response/Identity Packets
EAP Response/Challenge Packets
Error Packets
Controlled User(s) amount
In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x
System view/interface view
interface interface-list: Specifies a port list, which can contain multiple ports. The
interface-list argument is in the format of interface-list = { interface-type
interface-number [ to interface-type interface-number ] } & <1-10>, where
Description
Indicates whether handshake is
enabled on the port
Role of the port
Access control mode for the port
Access control method for the port
Guest VLAN configured for the port.
The value of 0 means that no guest
VLAN is configured.
Maximum number of users supported
on the port
Number of EAPOL packets received
(Tx) or sent (Rx)
Number of EAP Request/Identity
packets sent
Number of EAP Request/Challenge
packets sent
Number of EAP Success packets sent
Number of EAPOL Start packets
received
Number of EAPOL LogOff packets
received
Number of EAP Response/Identity
packets received
Number of EAP Response/Challenge
packets received
Number of erroneous packets received
Number of controlled users on the
port
1899