Display Dar Protocol-Statistic - H3C MSR 20-20 Command Reference Manual

display dar protocol-statistic

Syntax
View
Parameters
Description
Examples
display dar protocol-statistic [ protocol protocol-name | top top-number | all ]
[ interface interface-type interface-number ] [ direction { in | out } ]
Any view
protocol protocol-name: Displays specified protocol, in the same range with the
protocol-name defined in the if-match protocol command.
top top-number: Displays the newest protocols of the traffic in top-number, in the
range 1 to 16.
all: Displays all protocol packets; it defaults not to display the statistics packets
and the protocol packets in 0 byte.
interface-type interface-number: Specifies an interface by its type and number.
direction: Specifies the direction to display traffic. By default, it is bi-directional.
in: Displays the traffic on the inbound direction.
out: Displays the traffic on the outbound direction.
Use the display dar protocol-statistic
statistics information.
# Display statistics information about all protocol packets.
<Sysname> display dar protocol-statistic
Interface: Ethernet0/0
Port In/Out Packet Count
-------- ------ ------------- --------------- ------------ -----------
ftp IN 33
OUT 10
http IN 24
bgp IN 1
Total IN 58
OUT 10
Interface: Ethernet2/0
Port In/Out Packet Count
-------- ------ ------------- --------------- ------------ -----------
bgp OUT 23
Total OUT 23
Table 497 Description on the fields of the display dar protocol-statistic command
Field
Port
In/Out
command to display DAR packet
Byte Count Bit Rate
in 5 min
(bps)
1034 23
650 0
948 11
72 10
2054 44
650 0
Byte Count Bit Rate
in 5 min
(bps)
1480 110
1480 110
Description
Protocol name
Direction in which the packet is transmitted
(inbound/outbound)
1869
Max Bit Rate
in 5 min
(bps)
44
0
20
12
76
0
Max Bit Rate
in 5 min
(bps)
112
112