H3C MSR 20-20 Command Reference Manual page 1898

1898 C 126: 802.1
HAPTER
C C
X ONFIGURATION OMMANDS
Proxy trap checker is disabled
Proxy logoff checker is disabled
Handshake is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
Guest VLAN: 0
Max on-line user number is 256
EAPOL Packet: Tx 0, Rx 0
Sent EAP Request/Identity Packets : 0
EAP Request/Challenge Packets: 0
EAP Success Packets: 0, Fail Packets: 0
Received EAPOL Start Packets : 0
EAPOL LogOff Packets: 0
EAP Response/Identity Packets : 0
EAP Response/Challenge Packets: 0
Error Packets: 0
Controlled User(s) amount to 0
Table 506 Descriptions on the fields of the display dot1x command
Field
Global Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Transmit Period
Handshake Period
Quiet Period
Quiet Period Timer is disabled
Supp Timeout
Server Timeout
The maximal retransmitting times
Total maximum 802.1x user resource number per slot Maximum number of supplicants
Total current used 802.1x resource number
Ethernet1/1 is link-up
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
Description
Indicates whether 802.1x is enabled
Indicates whether CHAP
authentication is enabled
Indicates whether the device is
configured to send a trap packet
when detecting that a user is trying to
login through a proxy
Indicates whether the device is
configured to get offline any user
trying to login through a proxy
Setting of the username request
timeout timer
Setting of the handshake timer
Setting of the quiet timer
Indicates whether the quiet timer is
enabled
Setting of the supplicant timeout
timer
Setting of the server timeout timer
Maximum number of attempts for the
authenticator to send authentication
requests to the supplicant
supported per board
Total number of online users
Status of port Ethernet 1/1
Indicates whether 802.1x is enabled
on the port
Indicates whether the port is
configured to send a trap packet
when detecting that a user is trying to
login through a proxy
Indicates whether the port is
configured to get offline any user
trying to login through a proxy