Display Radius Statistics - H3C MSR 20-20 Command Reference Manual

display radius statistics

Syntax
View
Parameter
Description
Related command:
Example
Table 510 Description on the fields of the display radius scheme command
Field
Primary Auth IP/ Port/ State
Primary Acct IP/ Port/ State
Second Auth IP/ Port/ State
Second Acct IP/ Port/ State
Auth Server Encryption Key
Acct Server Encryption Key
Accounting-On packet disable
send times
interval
Interval for timeout(second)
Retransmission times for timeout Times of retransmission in case of timeout
Interval for realtime
accounting(minute)
Retransmission times of
realtime-accounting packet
Retransmission times of
stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
Total 1 RADIUS scheme(s)
display radius statistics
Any view
None
Use the display radius statistics
packets.
radius scheme.
# Display statistics about RADIUS packets.
<Sysname> display radius statistics
state statistic(total=1024):
DEAD= = 1024
AcctStart= = 0
Description
IP address/access port number/current status of the primary
authentication server: (active or block)
IP address/access port number/current status of the primary
accounting server: (active or block)
IP address/access port number/current status of the
secondary authentication server: (active or block)
IP address/access port number/current status of the
secondary accounting server: (active or block)
Shared key of the authentication server
Shared key of the accounting server
The accounting-on function is disabled
Retransmission times of accounting-on packets
Interval to retransmit accounting-on packets
Timeout time in seconds
Interval for realtime accounting in minutes
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet interval for the primary server
Format of the username
Unit of data flows
Unit of packets
1 RADIUS scheme in total
command to display statistics about RADIUS
AuthProc= = 0
RLTSend= = 0
AuthSucc= = 0
RLTWait= = 0
1953