Domain Default - H3C MSR 20-20 Command Reference Manual

Related command:
Example

domain default

Syntax
View
Parameter
Description
Related command:
Example
Use the
undo domain
By default, the system uses the domain of system. You can view its settings by
executing the display domain command.
If the specified ISP domain does not exist, the system will create a new ISP domain.
All the ISP domains are in the active state when they are created.
access-limit, state, display domain.
# Create ISP domain aabbcc.net, and enter ISP domain view.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net]
domain default { disable | enable isp-name }
System view
disable: disables the configured default ISP domain.
enable: Enables the configured default ISP domain.
isp-name: Name of an existing ISP domain, a case-insensitive string of 1 to 24
characters.
Use the domain default
domain.
By default, the default domain is named system.
Note that:
There must be only one default ISP domain.
■
When configure a default domain, this domain must have existed.
■
The default domain configured cannot be deleted unless you cancel it as a
■
default domain first.
state, display domain.
# Create a new ISP domain named aabbcc.net, and configure it as the default ISP
domain.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] quit
[Sysname] domain default enable aabbcc.net
command to remove an ISP domain.
command to manually configure the system default ISP
1937