Timer Realtime-Accounting (Radius Scheme View); Timer Quiet (Radius Scheme View) - H3C MSR 20-20 Command Reference Manual

Related command:
Example

timer quiet (RADIUS scheme view)

Syntax
View
Parameter
Description
Related command:
Example

timer realtime-accounting (RADIUS scheme view)

Syntax
View
Parameter
Description
reset stop-accounting-buffer, radius scheme, display
stop-accounting-buffer.
# In RADIUS scheme radius1, enable the device to buffer the stop-accounting
requests getting no responses.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable
timer quiet minutes
undo timer quiet
RADIUS scheme view
minutes: Primary server quiet period, in minutes. It ranges from 1 to 255 and
defaults to 5.
Use the command to set the quiet timer for the primary server, that
timer quiet
is, the duration that the status of the primary server stays blocked before resuming
the active state.
Use the
undo timer quiet
display radius scheme.
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme test1
[Sysname-radius-test1] timer quiet 10
timer realtime-accounting minutes
undo timer realtime-accounting
RADIUS scheme view
minutes: Real-time accounting interval in minutes, must be a multiple of 3 and in
the range 3 to 60, with the default value being 12.
Use the
timer realtime-accounting
interval.
command to restore the default.
command to set the real-time accounting
1971