Qos Wred Queue Table; Qos Wred Apply - H3C MSR 20-20 Command Reference Manual

1854 C 122: WRED T
HAPTER

qos wred queue table

Syntax
View
Parameters
Description
Related commands:
Examples

qos wred apply

Syntax
View
Parameters
C C
ABLE ONFIGURATION OMMANDS
Table 492 Description on the fields of the display qos wred table command
Field
Discard probability
qos wred queue table table-name
undo qos wred table table-name
System view
queue: Queue-based table, which randomly drops packets according to the
queue the packet belongs to when congestion occurs.
table table-name: Specified the table name, a string of characters in the range 1
to 32.
Use the qos wred queue table
WRED table view.
Use the
undo qos wred table
By default, no global WRED table exists.
It is not allowed to delete the table being used.
The queue-based WRED table can be applied only on Layer 2 port, on which the
queue-based WRED table can be applied only.
qos wfq, qos wred enable, display qos wred interface.
# Create queue-based WRED table exp-table1.
<Sysname> system-view
[Sysname] qos wred queue table exp-table1
[Sysname-wred-table-queue-table1]
qos wred apply table-name
undo qos wred apply
L2 interface view/port group view
table-name: Specifies the WRED table name.
Description
Denominator for calculating drop probability
command to create WRED table and enter the
command to delete the global WRED table.