Dot1X Quiet-Period - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Related command:
Example

dot1x quiet-period

Syntax
View
Parameter
Description
macbased: Specifies to use the macbased authentication method. With this
method, each user of a port must be authenticated separately, and when an
authenticated user goes offline, no other users are affected.
portbased: Specifies to use the portbased authentication method. With this
method, after the first user of a port passes authentication, all other users of the
port can access the network without authentication, and when the first user goes
offline, all other users get offline at the same time.
interface interface-list: Specifies an Ethernet port list, which can contain multiple
Ethernet ports. The interface-list argument is in the format of interface-list =
{ interface-type interface-number [ to interface-type interface-number ] } &
<1-10>, where interface-type represents the port type, interface-number
represents the port number, and & <1-10> means that you can provide up to 10
port indexes/port index lists for this argument. The start port number must be
smaller than the end number and the two ports must of the same type.
Use the
dot1x port-method
specified or all ports.
Use the
undo dot1x port-method
The default access control method is macbased.
display dot1x.
# Set the access control method to portbased for port Ethernet 1/1.
<Sysname> system-view
[Sysname] dot1x port-method portbased interface ethernet 1/1
Or
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] dot1x port-method portbased
dot1x quiet-period
undo dot1x quiet-period
System view
None
Use the
dot1x quiet-period
Use the undo dot1x quiet-period
By default, the function is disabled.
command to set the access control method for
command to restore the default.
command to enable the quiet timer function.
command to disable the function.
1907