Display Local-User - H3C MSR 20-20 Command Reference Manual

display local-user

Syntax
View
Parameter
Description
Related command:
Table 508 Description on the fields of the display domain command
Field
Domain User Template
Idle-cut
Self-service
Total 2 domain(s).
display local-user [ idle-cut { disable | enable } | service-type { dvpn | ftp |
lan-access | pad | ppp | ssh | telnet | terminal } | state { active | block } | user-name
user-name | vlan vlan-id ]
Any view
idle-cut { disable | enable }: Specifies local users with the idle cut function
disabled or enabled.
service-type: Specifies the local users of a type.
dvpn refers to users using DVPN tunnel,
■
ftp refers to users using FTP,
■
lan-access refers to users accessing the network through an Ethernet, such as
■
802.1x users,
pad refers to users using x.25 PAD,
■
ppp refers to users using PPP,
■
ssh refers to users using SSH,
■
telnet refers to users using Telnet,
■
terminal refers to users logging in through the console port, AUX port, or
■
Asyn port.
state { active | block }: Specifies all local users in the state of active or block. A
local user in the state of active can access network services, while a local user in
the state of blocked cannot.
user-name user-name: Specifies all local users using the specified username. The
username is a case-sensitive string of 1 to 55 characters and does not contain the
domain name.
vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to
4094.
Use the
display local-user
all local users.
local-user.
Description
Template for users in the domain
Whether idle cut is enabled
Whether self service is enabled
2 ISP domains in total
command to display information about specified or
1935