Display Fib Ip-Address; Display Fib Statistics - H3C MSR 20-20 Command Reference Manual

display fib ip-address

Syntax
View
Parameter
Description
Example

display fib statistics

Syntax
View
Parameter
U:Useable G:Gateway
R:Reject L:Generated by ARP or ESIS
Destination/Mask Nexthop
10.2.0.0/16 10.2.1.1
display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 |
mask-length2 } | longer ] | longer ]
Any view
ip-address1, ip-address2: Destination IP address, in dotted decimal notation.
ip-address1 and ip-address2 together determine an address range for the FIB
entries to be displayed.
mask1, mask2: IP address mask.
mask-length1, mask-length2: Length of IP address mask.
longer: Displays FIB entries that match the specified address/mask and have
masks longer than or equal to the mask that a user enters. If no masks are
specified, FIB entries that match the natural network address and have the masks
longer than or equal to the natural mask will be displayed.
Use the ip-address command to display FIB entries that match the
display fib
specified destination IP address.
# Display the FIB entries that match the natural network of 10.1.0.0 and have the
masks longer than or equal to the natural mask.
<Sysname> display fib 10.1.0.0 longer
Route Entry Count: 2
Flag:
U:Useable G:Gateway
R:Reject L:Generated by ARP or ESIS
Destination/Mask Nexthop
10.0.0.0/8 10.1.1.1
10.1.1.1/32 127.0.0.1
For description about the above output, refer to Table 156.
display fib statistics
Any view
None
H:Host B:Blackhole
Flag TimeStamp
U t[1150900568]
H:Host B:Blackhole
Flag TimeStamp
U t[1141140133]
HU t[1141140133]
D:Dynamic S:Static
Interface Token
Eth1/0 invalid
D:Dynamic S:Static
Interface Token
Eth1/0 invalid
InLoop0 invalid
789