Apply Ip-Precedence - H3C MSR 20-20 Command Reference Manual

Examples

apply ip-precedence

Syntax
View
Parameters
Description
Related commands:
Examples
# Set the next hop to 1.1.1.1 for matched packets.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-policy-based-route] apply ip-address next-hop 1.1.1.1 track 1
apply ip-precedence { type | value }
undo apply ip-precedence
policy-based-route view
type: Specifies the precedence type of IP packets.
value: Specifies a precedence value. There are eight precedences (0 to 7) for an IP
packet, each corresponding to a keyword. The precedences are listed in the
following table:
Table 164 IP precedences and the corresponding keywords
Precedence
0
1
2
3
4
5
6
7
Use the
apply ip-precedence
packets.
Use the undo apply ip-precedence
apply output-interface, apply ip-address next-hop, apply default
output-interface, and apply ip-address default next-hop.
# Set the precedence to 5 (critical) for matched packets.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-policy-based-route] apply ip-precedence critical
Keyword
routine
priority
immediate
flash
flash-override
critical
internet
network
command to set a precedence for matched
command to remove the setting.
809