Display Ip Policy-Based-Route Setup - H3C MSR 20-20 Command Reference Manual

Description
Examples

display ip policy-based-route setup

Syntax
View
Parameters
Description
Examples
Use the
display ip policy-based-route
interface policy routing information.
# Display all system and interface policy routing information.
<Sysname> display ip policy-based-route
Policy Name
pr02
pr02
pr01
Table 165 Description on fields of the display ip policy-based-route command
Field
local
pr02
Virtual-Template0
Ethernet1/0
display ip policy-based-route setup { policy-name | interface interface-type
interface-number | local }
Any view
policy-name: Displays policy routing information about the specified policy. A
policy name is a string of 1 to 19 characters.
interface interface-type interface-number: Displays the configuration of policy
routing enabled on the interface specified by the argument interface-type
interface-number.
local: Displays the configuration of enabled system policy routing.
Use the
display ip policy-based-route setup
configuration of enabled policy routing.
# Display the configuration of policy routing enabled on interface Ethernet1/0.
<Sysname> display ip policy-based-route setup interface ethernet 1/0
Interface Ethernet1/0 policy based routing configuration information:
policy-based-route pr01
permit node 1
if-match acl 3101
apply output-interface Ethernet1/0
Table 166 Description on fields of the display ip policy-based-route setup command
Field
Interface Ethernet1/0 policy based routing
configuration information
command to display all system and
interface
local
Virtual-Template0
Ethernet 1/0
Description
System policy routing.
Name of the policy.
Indicates that the policy named pr02 is applied to interface
Virtual-template0.
Indicates that the policy named pr01 is applied to interface
Ethernet1/0.
command to display the
Description
Configuration information of policy
routing enabled on interface
Ethernet1/0
811