Display Policy-Based-Route; If-Match Acl - H3C MSR 20-20 Command Reference Manual

display policy-based-route

Syntax
View
Parameters
Description
Examples

if-match acl

Syntax
View
Parameters
Description
Related commands:
Examples
display policy-based-route [ policy-name ]
Any view
policy-name: Policy name, a string of 1 to 19 characters.
Use the display policy-based-route
routing information.
# Display the configured policy routing information.
<Sysname> display policy-based-route
policy-based-route : aaa
Node 1 permit :
apply output-interface Vlan-interface2
Table 168 Description on the fields of the display policy-based-route command
Field
policy-based-route : aaa
Node 1 permit :
apply output-interface Vlan-interface2
if-match acl acl-number
undo if-match acl
policy-based-route view
acl-number: ACL number, in the range of 2000 to 3999. The number of a basic
ACL ranges from 2000 to 2999 and that of an advanced ACL ranges from 3000 to
3999.
Use the command to define an ACL match rule.
if-match acl
Use the
undo if-match acl
if-match packet-length.
# Permit the packets satisfying ACL 2010.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-policy-based-route] if-match acl 2010
command to display the configured policy
Description
The policy name is aaa.
The match mode of node 1 is permit.
The outgoing interface of matched packets
is Ethernet1/0.
command to remove the ACL match rule.
813