Isis Ipv6 Enable - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Route summarization is disabled by default.
Configuring summary routes can reduce the size of the route table, LSPs and LSDB.
Routes to be summarized can be IS-IS routes or redistributed routes. The cost of a
summary route is the smallest cost among all summarized routes.
Examples
# Configure a summary route of 2002::/32.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] ipv6 summary 2002:: 32

4.1.11 isis ipv6 enable

Syntax
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
View
Interface view
Parameters
process-id: IS-IS process ID, ranging from 1 to 65535. The default is 1.
Description
Use the isis ipv6 enable command to enable IPv6 for the specified IS-IS process on
the interface.
Use the undo isis ipv6 enable command to disable the configuration.
IPv6 is disabled on the interface by default.
Examples
# Enable global IPv6, create IS-IS routing process 1, enable IPv6 for the process, and
enable IPv6 for the process on VLAN-interface100.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
[Sysname-isis-1] quit
[Sysname] interface Vlan-interface 100
[Sysname--Vlan-interface100] ipv6 address 2002::1/64
[Sysname--Vlan-interface100] isis ipv6 enable 1
Chapter 4 IPv6 IS-IS Configuration Commands
4-12